Imposta la temperatura e aspetta che la raggiunga.
HAS_TEMP_HOTEND
M109 S<temp>
M109 R<temp>
Parametri | Valore | Descrizione |
---|---|---|
P | 0 to 5 = 0 | Indice dell'hotend, se ce n'è più di uno |
S | u_int | Aspetta che l'hotend raggiunga la temperatura indicata. Aspetta solo quando scalda |
R | u_int | Aspetta che l'hotend raggiunga la temperatura indicata. Aspetta quando scalda e quando raffredda |
IF AUTOTEMP is enabled, S<mintemp> B<maxtemp> F<factor>. Exit autotemp by any M109 without F
…